About Rich Carlson

Description

$449,000.00

John Deere 803M w/Waratah 622 4X4 head

2017 model, purpose built, w/only 1460 hours, warranty remaining, 28 inch double grousers and 85% undercarriage remaining, in Oregon

1033 total views, 11 today

$85,000.00

Ponsse Buffalo Forwarder

2000 model, not sure of hours, 8-wheel drive, Cat engine, 26 foot extend a boom w/very good tires and working condition, in Wisconsin

457 total views, 2 today

$125,000.00

Ponsse Ergo w/H73E head

2001 model, not sure of hours, Mercedes diesel,6 wheel drive, 32 foot reach with good tires and in good working condition, in Wisconsin 

402 total views, 2 today

$164,000.00

John Deere 648H grapple and winch

2014 model w/3100 hours, 30,5 tires @90%, direct drive, one owner and well cared for, in Mo.

327 total views, 2 today

$39,000.00

Timberjack 240A cable skidder

1986 model, hour meter not working, Cummins engine, 23.1X 26 tires @90% tread remaining, winch working well and used daily, in Michigan

378 total views, 1 today

$97,500.00

Mack Granite log truck and pup

2003 model w/480000 total miles, newer 427 Mack engine has 280000 miles on it, 18 speed Mack trans and new clutch, new exhaust, near new […]

489 total views, 1 today

$138,500.00

Case CX240 w/Log Max 7000XT

2006 model w/8200 hours on machine, only 4000 hours on head w/top saw, 50% undercarriage or better w/36 inch grouser pads in CO price reduced […]

398 total views, 1 today

$149,000.00

John Deere 648H dual arch grapple and winch

2010 model w/9000 hours, rebuilt engine, 30.5 tires @90% w/new set of Bear Paw chains and 24.5 tires @ 50%, fuel heater and Canadian light […]

344 total views, 1 today

$58,000.00

Cat 992 loader w/log forks and clamp

1979 model w/One Pass Logging Forks and clamp, 60% tires, runs and works well, no longer needed in CO, 10-8-18 make an offer, time for […]

536 total views, 0 today

$185,000.00

Kenworth T800 log truck and pup

2006 model w/rebuilt 550 Cat engine, 18 speed trans, newer front diff, newly rebuilt 2015 Serco 8500 loader,1999 Rosa pup, complete rebuild on Hendrickson suspension, […]

567 total views, 2 today

$195,000.00

Phoenix DF703 3-wheel feller buncher

this is built in the same factory w/the same dedicated workers that built the Valmet 603 that Komatsu discontinued, but w/many improvements, it can have […]

442 total views, 2 today

$250.00

Dodge 3500 front bumper

this is from 2004 model and may fit others, part number is in picture, complete w/lights, there is nothing wrong with this, i replaced it […]

271 total views, 0 today

$7,500.00

Redi Haul R25220 tag trailer

1998 model w/very little use, near new tires and new brakes, 25 foot deck w/good ramps, 33 1/2 inch deck height, GVWR 45.450, this is […]

368 total views, 1 today

$49,000.00

Daewoo 220 Solar w/Pro mark 50 delimber

1999 model w/11500 hours, 28 inch double bar grousers and 70% undercarriage remaining, this is tight and dry but may need a swing motor and […]

319 total views, 1 today

$55,000.00

Hydro Ax 470 w/20 inch Waratah Hot Saw

2004 model w/11500 hours, rebuilt Cummins engine, near new 23.1X26 tires and 1-set of near new ice chains, newer teeth on saw and new windshield, […]

366 total views, 1 today

$335,000.00

Komatsu 855.1 forwarder

2016 model w/2100 hours, cold weather start and hood guard, tracks all around, near new condition and 1-owner, in Quebec

378 total views, 0 today

$192,000.00

John Deere 648H dual arch grapple

2014 model w/2240 hours, Tier 111 engine, direct drive, 30.5 tires @80% tread remaining and chains all around, 1-owner and in very good condition in […]

382 total views, 1 today

$89,000.00

KMC 2500 Grapple Skidder

1996 model w/2300 hours, this has had little use, dual arch Young 110 inch grapple and winch, 1-owner in Virginia, price reduced 10-29-18

480 total views, 3 today

$15,000.00

Rolly 11 heads

we have 2 available complete w/computers, not sure of year or hours, 1 does need rotation final drive, both are working heads in Pa. price […]

519 total views, 2 today

$125,000.00

Timbco 820D Clam Bunk Forwarder

2000 model w/ 13000 hours, 8-wheel machine w/60% 28L tires and 50% tracks all around, Cummins engine, in Ontario, Canada

426 total views, 0 today

$1,500.00

Cletrac AG3 crawler

s/n 2X1516, this appears to be complete but not running, engine turns over and has very good undercarriage, in Wisc.

525 total views, 2 today

$8,500.00

Mack CH 613

not sure of year, vin no. is 103247, this has been a local truck w/vacuum tank on it, there are 39147 actual miles, Maxi Torque […]

452 total views, 2 today

$96,500.00

Fabtek 153

2001 model? 13132 hours, only 200 hours on new engine, new turn box and drive sprockets, resealed valve bank, many spare parts and extra head […]

619 total views, 1 today

$25,995.00

Cat 303.5 mini excavater

2012 model w/2279 hours, new 24 inch bucket, battery and tracks, in upper Michigan

336 total views, 0 today

$59,000.00

Tigercat 845 tracked feller buncher w/hotsaw

1999 model w/8200 hours, 20 inch saw and 40 degree tilt on head, Cummins 300 Hp engine, 36 grouser pads on 90% undercarriage, this is […]

495 total views, 0 today

$147,000.00

Valmet 911 Extreme Harvester

2007 model w/7500 hours, 370.2 head, auto leveling cab, squirt boom for 34 foot reach, quad track design on machine, also has set of regular […]

413 total views, 1 today

$89,000.00

Valmet 603 three wheel feller buncher

2006 model w/600 ACTUAL HOURS, Cummins 130 Hp engine, 18 inch hot saw, 28L tires at 80%, enclosed cab w/Heat and AC, this was a […]

558 total views, 1 today

$139,500.00

John Deere 2454 D tracked log loader

2012 model w/9155 hours, Hi-Rise cab w/hyd. tilt for transport, 28 inch pads and 60% undercarriage, this has been dealer inspected, engine and hyd’s. are […]

466 total views, 2 today

$2,500.00

Woods 137 4-sided molder

this is a good machine, owner has replaced it with newer one, it is 3-phase and 12 inch capacity, he kept heads for newer machine, […]

388 total views, 1 today

$1,200.00

Motortovice Soft Start

100 HP and 240 VAC voltage, in Northern Ill

267 total views, 0 today

$650.00

Relione 40 HP motor

1770 RPM 1.0 factor, in Northern, Ill

264 total views, 3 today

$1,950.00

Shop Built Box Shaver Mill

42 inch X 30 inch box size, 30 HP motor on cutter head and 1 HP gear drive to move box, in Northern Ill. price […]

411 total views, 1 today

$1,400.00

Lincoln 100 HP electric motor

1765 RPM, 1.15 service factor, works good, just no longer needed in Northern Ill

341 total views, 0 today

$77,500.00

Fabtek 346B

2004 model w/approx. 17000 hours, new engine, pro-heat works, continuous rotation bucket and extend a boom, tracks and chains included, this is a clean machine […]

587 total views, 1 today

$5,200.00

Mighty Mo frame straightener

this is model 8000 also called Mo Clamp, looks to have had very little use and has many attachments, in upper Michigan

338 total views, 2 today

$1,750.00

Hale water pumps

we have 2 available, 1 is running and working w/slant six Chrysler engine on good trailer, model HT 413797 part number 2-75TSA3698 and s/n E264034 […]

360 total views, 0 today

$179,000.00

Tigercat 635D Bogey Grapple Skidder

2013 model w/11000 hours, winch, tires are at 40 to 50% tread remaining, this is tight and dry w/everything working, well maintained by 1-owner, in […]

669 total views, 3 today

$79,000.00

Fabtek 546C

2001 model w/15100 hours, excellent tires, bunks are slightly bent, but has been well maintained and works well, in Michigan

528 total views, 0 today

$3,000.00

Centennial 2-wheel scraper

this is hyd. and looks like 4-5 yard, in upper Michigan

377 total views, 2 today

$2,500.00

International TD 14

this is missing blade other wise complete, does have a cracked head and will be sold as parts or project in upper Michigan

539 total views, 0 today

$5,000.00

International TD 18

they say this is complete but has a cracked final drive and will be sold as parts or project, considering part trade

480 total views, 1 today

$1,000.00

Chevy and Ford dump trucks

we have one of each w/dump boxes, 1-is missing engine, no other details at this time, in upper Michigan, price is $1000 each OBO

419 total views, 3 today

$1,500.00

folding gooseneck lowboy trailer

i assume this is at least 35 ton, tandem axle, they used to haul TD 24 with it, no other details at this time, in […]

495 total views, 0 today

$3,000.00

Michigan T6-K Power Shovel

this is a great a machine to restore or use for lawn art, they tell me it has an air compressor for controls, also have […]

637 total views, 1 today

$12,000.00

Austin Western 4-wheel drive grader

this runs and works well, may have snow wing also in upper Michigan, sale or part trade

572 total views, 1 today

$3,500.00

Oliver OC3-68

this has good undercarriage and Hall manure loader, runs good but needs gas tank, in upper Michigan

434 total views, 0 today

$1,000.00

Allis Chalmers M

this has very good undercarriage, engine has a cracked block and is some taken apart, parts or project in upper Michigan

415 total views, 1 today

$3,000.00

International 3000 Ind. loader tractor

this has 2505 gas engine that runs and tractor works but has bad steering cylinder seals, in Michigan and will consider part trade

450 total views, 0 today

$6,000.00

Wooldridge cable scraper

this is the only one i have ever seen and appears in very good condition, 4-wheeler, in upper Michigan and may consider some trade

469 total views, 0 today

$2,000.00

International log truck w/loader

this is 1959 model, tandem axle and gas engine, extra cab included, this will be a project for sure or parts and all i know […]

700 total views, 7 today

$6,000.00

International 2T55 scraper

this is cable operated w/Cummins engine, nice looking machine for the age, will be sold as parts or project and may consider some trade, in […]

395 total views, 0 today

$3,000.00

International TD 15

this has a 2-yard bucket and good undercarriage, but bad final drive bearing, can be sold for parts or project and may consider some trade, […]

371 total views, 0 today

$1,000.00

International flat bed dump

1972 model that runs an drives, cab mounts are rusted and need replacing or use for parts, in upper Michigan

381 total views, 1 today

$3,000.00

International 500

this is diesel but engine is tight from not using, has good undercarriage and 4 in 1 Drott bucket, in upper Michigan and will consider […]

389 total views, 0 today

$1,000.00

GMC fire truck

this appears to be complete and selling for parts, has not run in some time, in upper Michigan

417 total views, 0 today

$4,000.00

Cleveland Crane Company

Cleveland Crane Company 30359, this is complete but both engines have set from not using, includes drag line bucket and log grapple, in upper Michigan, […]

425 total views, 2 today

$3,000.00

International TD 6 w/all hyd. blade

this runs and works but has one weak final drive in upper Michigan, will consider part trade and selling parts

389 total views, 1 today

$1,500.00

International Load Star dump truck

this is in upper Michigan, not sure of all the details, but is scrap iron price

341 total views, 0 today

$6,000.00

International TD 24

this has been sitting for a while but is complete and will work, the blade winch broke when they quit using it and has leaking […]

490 total views, 1 today

$3,500.00

Ford w/Marmon Harrington 4-wheel drive

1938 or 39? [NO TITLE] 19165 miles showing, this was a wrecker w/snow plow at one time, appears to be complete w/good re-store-able cab and […]

453 total views, 1 today

$2,200.00

Gallion Grader

i could find no tag to identify this grader for size and year, it is a big one and complete, with a little oil and […]

324 total views, 1 today

$1,200.00

Adams Leaning Wheel Grader

model no.12 s/n 3810 this is a big one, would make good lawn ornament or could be made to work again, but has been setting […]

343 total views, 1 today

$23,000.00

Tigercat 240B Log Loader w/CTR delimber

2004 model w/22000 hours, this is tight and dry, working now in GA, well maintained by one owner

706 total views, 1 today

$200.00

Aluminum gas tank

this is 48 inches long, 18 1/2 high and wide, 50 gal. good condition, just not needed, in Wisconsin

399 total views, 2 today

$1,350.00

TGI Industrial angle plow

model GL-SP240 for skid steer or compact tractor, was bought for 50HP machine and never used, still in packing crate, in Wisconsin

330 total views, 2 today

$6,000.00

Seaman Tiller

this has perfect running 471 Detroit engine, tiller is complete but not working now, needs work on shaft going in to transmission, good tires and […]

625 total views, 1 today

$100,000.00

Timbco 415 w/Logmax 7000

2000 model w/10 foot squirt boom, new undercarriage, fire suppression, 5.9 Cummins engine, this is ready to work in New York price reduced 4-29-19

663 total views, 3 today

$249,000.00

Tigercat 630E dual arch and winch

2016 model w/1350 hours, 35.5 tires@90% and new set of 30.5 tires included, tier IV engine, this has been well maintained by one owner, in […]

428 total views, 0 today

$110,000.00

Tigercat 845B w/Logmax 6000 head

1999 model w/2011 head, 402 computer, working machine in Canada, price is listed in US funds, we can help with transportation and brokerage

724 total views, 0 today

$79,000.00

Cat 525C dual arch skidder

2010 model w/8000 hours, 30.5 tires, 3@25% and 1@ 90% this is tight and dry, AC and heat work, well maintained by one owner in […]

518 total views, 1 today

$209,000.00

Cat 525D skidder

2016 model w/3650 hours, dual arch and winch, 35.5 tires @ 70% w/ Eco tracks on front,this is well maintained and in Miss. price reduced […]

723 total views, 0 today

$133,000.00

Cat 320C LL tracked log loader

2006 model w/7300 hours, 38 foot of reach w/live heel, cab riser w/hyd. tilt, bulkhead hyds. for attaching to slasher, good working condition, in California

628 total views, 0 today

$40,000.00

John Deere 648G111

2003 model w/11498 hours, 30.5X32 tires [TRACKS NOT INCLUDED] working in Michigan, price reduced 8-20-18

588 total views, 2 today

$50,000.00

Timbco 425D w/Timbco Bar Saw

2000 model, newer engine, final drives and pumps, good undercarriage, owner operated in Michigan, price reduced 8-20-18

793 total views, 2 today

$9,500.00

Cat D6 w/winch

1969? S/N 44A10634 this has rebuilt engine, new radiator and muffler, pins show some wear but will go a long time yet and could be […]

559 total views, 1 today

$69,000.00

Ecolog 580 w/AMF 60 head

2001 model w/6600 total hours, AMF has been replaced with Keto 500 head and spare head included, 710 tires at 50%, more than $5000 in […]

996 total views, 1 today

$72,500.00

John Deere 120 w/Fabtek 2000 series head

2001 model w/approx. 13000 hours, looks good w/near new undercarriage and in Wisconsin

1397 total views, 4 today

$24,500.00

Tree Farmer C4 w/Hood loader

1984 model w/4 cyl. Duetz engine, good 18.4X26 tires, working good in Wisconsin, 11-3-18 this has been cleaned and painted since listing, same price

2265 total views, 0 today

$1,500.00

Rex 235 Cement Mixer

this appears to be complete w/ LeRoi hit and miss engine, everything is tight but very re-storeable or use for lawn art as is, will […]

423 total views, 1 today

$5,000.00

Cadillac Eldorado ESC

this can be project, parts or will trade, 2001 model with approx. 50000 miles, Florida car w/no rust, i love this car and how it […]

436 total views, 0 today

$65,000.00

Valmet 911.1 w/ 965 head

2003 model w/18200 hours, working in Wisconsin. price reduced 1-12-19

1381 total views, 2 today

$200.00

David Bradley pump jack

this appears to be new and never used, can find no model number or Id tag, has been inside and turns over easy, in Wisconsin

928 total views, 1 today

$59,000.00

Cat 541 w/Hot Saw

2006 model w/10600 hours, 22 inch center post hot saw and 340 degree rotation 60% undercarriage on 24 inch pads, in BC  price reduced 8-28-17

1161 total views, 2 today

$1,500.00

6 inch water pump

this has Wisconsin engine and is said to work good, just no longer needed, in southern Wisconsin

556 total views, 2 today

$550.00

Post Hole Digger

this is 3-point and has 8 and 12 inch dia. augers, in Wisconsin

636 total views, 0 today

$142,000.00

Ponsse Ergo w/H73E head

2005 model w/approx. 17000 hours, all new cab installed in 2015, working in Wisconsin

1401 total views, 4 today

$189,000.00

John Deere 648H dual arch grapple and winch

2014 model w/989 hours, torque converter, 30.5 tires, in Mo

1230 total views, 3 today

$105,000.00

Bandit 3090 whole tree drum chipper

2010 model w/ 3900  hours, 525 HP engine, remote controls, this is 1-owner machine and well cared for, lost contract w/mill and no longer needed, […]

1077 total views, 2 today

$10,500.00

Shop built spread axle trailer

this has had very little use and is in near new condition, plumbed for loader and rated for 90000 lbs. brakes look good, in Wisconsin

1056 total views, 1 today

$29,500.00

Wood-Mizer Super Hyd. Model LT40?

[NOT ACTUAL PHOTO] this has 3-phase electric motor, has had very little use and works good, just not what the owner wants and needs, it […]

852 total views, 0 today

$39,995.00

Dynamic cone head chipper [now Barko]

this is 24 inch cap. w/2000 hours and remote controls, 250 Hp John Deere engine, Coldfire suppression system, factory updated drum fan blades & amp, […]

1038 total views, 0 today

$77,000.00

Valmet 840.2

2002 model w/21000 hours, dozer blade, 2-new titres on rear and 2-sets of chains, newer gear box, working well and in Wisconsin

1306 total views, 0 today

$165,000.00

Bandit 2590 whole tree drum chipper

2010 model w/3810 hours, Cat 440 HP engine, 22 inch cap. new anvil, knife holders and in feed, in Ga.

993 total views, 0 today

$185,000.00

Cat 517 w/Esco swinging grapple

2000 model w/5400 hours, no winch, 75 % undercarriage, 6-way dozer blade, in Indiana

1292 total views, 1 today

$119,000.00

Cat 521 w/22 inch hot saw

2006 model w/5965 hours, center post head w/270 degree rotate, new undercarriage and 36 inch triple grouser pads, gull wing engine access, in Va. price […]

1090 total views, 0 today

$35,000.00

Daewoo 130 LLV

2000 model, 30000 lb, 8 foot 6 inchs wide, .90 bucket, in Michigan

766 total views, 0 today

$17,500.00

Generac 130KW generater

2011 model ET 13068 with 300 hours, LP gas 6.8 liter V10 Ford engine, this is in perfect working condition, just a larger unit than […]

664 total views, 0 today

$89,000.00

Cat 573 w/Hot Saw

2012 model w/6300 hours, 22 inch center post head, 34 inch tires @40% 1-owner, in MS

1211 total views, 3 today

$295,000.00

Ponsse Buffalo King

2010 model w/6500 hours, includes tracks and new pontoons that have not been installed yet, brand new center bearing, in  Wisconsin

2078 total views, 3 today

$2,500.00

Ford w/tilt rack

1967 model, V8 gas, not running, 5 speed trans and 2 speed axle, i think rack is 24 foot and has hyd. cyl. winch, float […]

1099 total views, 1 today

Page 2 of 4 1 2 3 4

Sorry, no posts could be found.