Ford w/tilt rack
1967 model, V8 gas, not running, 5 speed trans and 2 speed axle, i think rack is 24 foot and has hyd. cyl. winch, float […]
2807 total views, 2 today
Ford w/Marmon Harrington 4-wheel drive
1938 or 39? [NO TITLE] 19165 miles showing, this was a wrecker w/snow plow at one time, appears to be complete w/good re-store-able cab and […]
2590 total views, 1 today
Cement Mixer
no tag, unsure of make, appears to be all there and in good restorable condition, has 5 HP Fuller Johnson engine that is loose, complete […]
1066 total views, 2 today
Austin BLM Western Crane
this can be parts or project, i have never seen another like it, S/N 110732 i did use this some years ago and it is […]
1419 total views, 3 today
Mastercraft Forklift
this can be parts or project, model MC-661126611 S/N 3256 has 3 cyl Ford gas engine, manual trans, side shift, very good 16.9X24 tires, i […]
1290 total views, 3 today
Cat D2 crawler dozer
S/N 4U2220 6571 hours showing, This has electric start on pony engine, both engines run good, has good undercarriage and belt pully, it has manual […]
1468 total views, 3 today
Allis Chalmers M crawler tractor
this can be parts or project, s/n is WM 14191 they were made from 1932 to 1942 and only 14500 approx. made, this does have […]
1527 total views, 4 today
Allis Chalmers WC
S/N 767775 this is not running, but will, has been stored inside for years, has hand and foot breaks, cultivator lift and electric start and […]
2545 total views, 3 today
Farmall H tractor
1952 model, 1-owner and in show condition, new rear tires, good front ones, still 6 volt system, owner will consider trade for old cars and […]
2912 total views, 2 today
Fordson Power Major
not sure of the year and can find no s/n, it is diesel, starts, runs and works, power steering needs work and it has need […]
2507 total views, 2 today
Cletrac AG3 crawler
s/n 2X1516, this appears to be complete but not running, engine turns over and has very good undercarriage, in Wisc.
4075 total views, 2 today
Rex 235 Cement Mixer
this appears to be complete w/ LeRoi hit and miss engine, everything is tight but very re-storeable or use for lawn art as is, will […]
3325 total views, 2 today
Cat 22 crawler tractor
s/n 2F 6894 this is a good restore-able tractor, engine turns over, looks to be complete w/original mag and carb, near new rails and sprockets, […]
3791 total views, 2 today
Allis Chalmers HD5 crawler loader
s/n 6944, this has good undercarriage, not running yet, just got it delivered to Antigo area 54409 this can be a project or parts and […]
6505 total views, 2 today
Cletrac model 15
this appears to be complete and have good undercarriage, s/n 1058, it has been stored inside for last 10 years, appears to be tight now […]
5363 total views, 2 today
MM engine = Minneapolis Moline
model no. 3 5/8X5 206A 4A s/n 02200445 this is from crane, is complete w/clutch but tight, in Wisconsin zip 54409
4515 total views, 4 today
General 1300 X 24 grader tires
we have 2-tires,bald w/no breaks or cuts, inside and dry, these are old but good for spares,$100 each in Wisc. 54409
3986 total views, 2 today
Standard Oil Drums
we have 2-56 gal.drums,$100 each,no.161459,ICC-5 these are in good condition and in Wisc. 54409
4920 total views, 3 today
Wayne 2-cyl.compresser
this has IXO 143 no.is all i can find on it, it is missing electric motor only, was a working unit and the oldest i […]
3366 total views, 2 today
PTO driven hyd.pump
this has left hand rotation, complete and appears in good condition, in Wisc. 54409
3415 total views, 2 today
R-MM front mount hyd.pump
this was driving a sweeper broom on R-MM,no tag,will consider trade,in Michigan 49858
3300 total views, 2 today
US Wind Engine & Pump co. pump jack
made in Batavia,Ill.casting no.s A1012 and 1013 in Michigan 49858
4975 total views, 4 today
Monitor type ZA pump jack
this was made by Baker mfg co. number on casting is P50480 in Michigan 49858
11409 total views, 3 today
John Deere block
this is block w/crankshaft only, looks good, but know nothing about it, took on trade and will consider other trades, in Wisconsin 54143
3425 total views, 2 today
Jeweler Lathe
this has complete set of collets and electric motor, appears to be in near perfect condition, in Wisconsin 54143 will consider trade
4425 total views, 3 today
Mangle
this is a working machine and makes a great conversation piece, will consider trade, in Wisconsin 54143
5475 total views, 3 today
Welch Lab Machine
mfg. by WM Welch Scientific Company Chicago, Ill. General Electric motor w/variable speed, forward and reverse and revolution counter, not sure what this was used […]
3325 total views, 2 today
Sentinal Superheterodyne 32 volt DC radio
model 67L1385, this is in good condition, but have not heard it work, do have 32 volt Delco light plant that used to run this […]
3062 total views, 1 today
Pedal Toy,[no name]
this is in good condition,will consider trade,in Wisconsin
3259 total views, 2 today
Pelton Auto Electric Air Compressor?
this is a working item,think it is from dentist? Would run a toy display? mfg. by The Pelton + Crane Co. Detroit, Mich. S/N 15223 […]
4406 total views, 2 today
Delco light plant
this is complete and turns over,never had this running,no time,not sure of model or s/n? in Michigan,
4159 total views, 2 today
IH hit and miss engine
this is 3 to 4 hp,engine from hay baler? It appears to be complete,but is tight,will consider trades,in Wisconsin
3684 total views, 2 today
Massey Ferguson sign
this was a lighted sign in dealership, there are 2-panels,4 foot by 8 foot in good condition,$200.00 each or will consider trade
4917 total views, 2 today





































