2-Valmet 911C Harvesters w/965 head
Parts & Heads, Processors 
both are 1999 models, 1-is working and 1-is running but needs work, 1-set of chains and many extra parts, 22000 and 16000 hours, in Wisconsin,,will […]
292 total views, 1 today
Valmet 911.3 w/370.2 head
Processors
2008 model w/13950 hours, this can be parts or project, was working till Aug 2019 when hyd. pump failed, has 600 mm tires and tracks, […]
333 total views, 1 today
Log Max 7000XT head
Parts & Heads, Processors
2013 model w/approx. 6000 hours, 360 degree rotation, computor, monitor and joystick controls included, top saw has 404 chain and 3/4 chain on bottom saw […]
176 total views, 1 today
Log Max 6000B processor head
Parts & Heads, Processors
2015 model w/ 8000 hours, Rotobec continuous rotator, includes Logmate 500 computer and monitor, new feed rollers and drive motors, all cylinders rebuilt, $40000 in […]
223 total views, 1 today
Hydro Ax 311B w/Silver Streak processor and shear head
Processors, Rubber Tired Machines
1983 model w/John Deere engine, good tires and working condition, this is a simple machine for harvesting or feller buncher work, in Wisconsin
335 total views, 2 today
John Deere 2054 w/Waratah 622 head
Processors, Track Machines
2003 model w/15500 hours, 30% undercarriage, owner reports that everything works well, Heat and AC, in La
244 total views, 0 today
Barko 240 processor w/Skidmore head
Processors, Track Machines
2014 model w/approx. 4000 hours, Pro heat, fire suppression and stump spray system, 18 inch head, 80% undercarriage, this will be in excellent condition from […]
392 total views, 1 today
John Deere 1270E w/758 head
Processors, Rubber Tired Machines
2012 model w/approx. 9700 hours, comes w/ pine and hardwood rollers, CH 710 boom, new cold weather start, chains, this is a very clean and […]
329 total views, 0 today
Ponsse Ergo w/H6 head
Processors, Rubber Tired Machines
2003 model w/ approx. 16500 hours, this is near perfect coming from a good home and well maintained, HN 125 boom, H6 head has approx. […]
298 total views, 0 today
Valmet 415EX tracked harvester
Processors, Track Machines
2005 model w/16000 hours Sisu engine w/new injector pump, 30 feet of reach, Valmet 370E head, 60% undercarriage and new rollers, 36 inch flotation pads, […]
252 total views, 1 today
TimberPro 735B leveling harvester w/ Log Max 7000XT fixed head
Processors
2008 model w/6950 hours, 2013 Log Max 7000XT fixed head, 360 degree rotation, with 3/4 chain on bottom saw and 404 chain on top saw, […]
369 total views, 0 today
Keto 500 processing head
Parts & Heads, Processors
2004 model? owner retired and removed from machine, complete w/computer, monitor, joystick handles, includes $25000 worth of parts including spare computer. many saw bars , […]
340 total views, 1 today
Ponsse Ergo w/H7 head
Processors, Rubber Tired Machines
this is 2002 model w/ 2007 head, 06-HN200 crane, new boom end been rebuilt 2500 hours ago, runs good and mostly cuts pine, in Wisc.
394 total views, 1 today
TimberPro 830B Combi Machine
Forwarders, Processors, Rubber Tired Machines, Skidders
2009 model w/9200 hours, processing boom w/Woody Harvesting Head, this is set up to harvest, process, grapple and forward wood, Cummins 300 HP engine, Clambunk […]
579 total views, 1 today
Log Max 7000XT processing head
Parts & Heads, Processors
2014 model w/ONLY 300 hours, new condition, top saw w/404 bar and chain, lower cutting bar has 3/4 inch chain, complete package includes rotator, computer, […]
523 total views, 0 today
Waratah 624C 4X4 head [only]
Parts & Heads
2017 model w/1000 hours,includes handles, computer, screen and rotator, plus spare parts kit, in Wisc.
454 total views, 1 today
Waratah 623C head [only]
Parts & Heads
2017 model w/4500 hours, includes Super Grip handles, computer, screen and rotator, very good condition in Wisc
436 total views, 1 today
Ponsse Ergo w/73E head
Processors, Rubber Tired Machines
2005 model w/17000 hours, pre heat and fire suppression, new pump, 1-new joy stick, 810200 crane boom, 1-set chains and tracks, this is clean and […]
578 total views, 0 today
Valmet 425 EX-10 harvester w/370 head
Processors, Track Machines
2006 model w/9550 hours, 36 foot telescopic boom, leveling cab, Cummins 300 HP engine, 40% undercarriage, computer not working on head, in Oregon
625 total views, 1 today
Valmet 941 Harvester
Processors, Rubber Tired Machines
2007 model w/ 10200 hours, newer 2010 370.2 head, leveling cab, 34 foot reach, tracks, working in MA
489 total views, 2 today
TimberPro TN 725 w/Log Max 7000
Processors, Track Machines
2016 model w/2779 hours, 8.3 Cummins, 300 HP, Espar heater, fire suppression, 75 % undercarriage, Log Max head is 2014 model w/resealed valve bank and […]
666 total views, 1 today
Ponsse Ergo w/H-73 head
Processors, Rubber Tired Machines
2004 model w/approx.14000 hours, 3-pumps have been resealed, gear box rebuilt, 1-set of tracks, 70% tires, spare hoses and other parts included, in lower Michigan
591 total views, 1 today
TimberPro TL735 w/Valmet 385 head
Processors, Track Machines
2014 model w/2620 hours, recently rebuilt head and spare head included, 24 inch singe bar grousers and 80% undercarriage remaining, South Fork boom w/squirt, camera, […]
509 total views, 0 today
John Deere 803M w/Waratah 622 4X4 head
Processors, Track Machines
2017 model, purpose built, w/only 1460 hours, warranty remaining, 28 inch double grousers and 85% undercarriage remaining, in Oregon
1264 total views, 1 today
Ponsse Ergo w/H73E head
Processors, Rubber Tired Machines
2001 model, not sure of hours, Mercedes diesel,6 wheel drive, 32 foot reach with good tires and in good working condition, in Wisconsin
569 total views, 0 today
Case CX240 w/Log Max 7000XT
Processors, Track Machines
2006 model w/8200 hours on machine, only 4000 hours on head w/top saw, 50% undercarriage or better w/36 inch grouser pads in CO price reduced […]
627 total views, 2 today
Rolly 11 heads
Parts & Heads, Processors
we have 2 available complete w/computers, not sure of year or hours, 1 does need rotation final drive, both are working heads in Pa. price […]
779 total views, 1 today
Fabtek 153
Processors, Track Machines
2001 model? 13132 hours, only 200 hours on new engine, new turn box and drive sprockets, resealed valve bank, owner would like a Wisconsin log […]
950 total views, 0 today
Valmet 911 Extreme Harvester
Processors
2007 model w/7500 hours, 370.2 head, auto leveling cab, squirt boom for 34 foot reach, quad track design on machine, also has set of regular […]
612 total views, 1 today
Timbco 415 w/Logmax 7000
Processors, Track Machines
2000 model w/10 foot squirt boom, new undercarriage, fire suppression, 5.9 Cummins engine, this is ready to work in New York price reduced 4-29-19
861 total views, 0 today
Tigercat 845B w/Logmax 6000 head
Processors, Track Machines
1999 model w/2011 head, 402 computer, working machine in Canada, price is listed in US funds, we can help with transportation and brokerage
966 total views, 1 today
Ecolog 580 w/AMF 60 head
Processors, Rubber Tired Machines
2001 model w/6600 total hours, AMF has been replaced with Keto 500 head and spare head included, 710 tires at 50%, more than $5000 in […]
1349 total views, 0 today
John Deere 120 w/Fabtek 2000 series head
Processors, Track Machines
2001 model w/approx. 13000 hours, looks good w/near new undercarriage and in Wisconsin
1926 total views, 0 today
Valmet 911.1 w/ 965 head
Processors, Rubber Tired Machines
2003 model w/18200 hours, working in Wisconsin. price reduced 1-12-19
1600 total views, 0 today
Ponsse Ergo w/H73E head
Processors, Rubber Tired Machines
2005 model w/approx. 17000 hours, all new cab installed in 2015, working in Wisconsin
1623 total views, 0 today
Hyundai 130LC near new rails w/pads
Parts & Heads, Processors
from 1993 burnt machine s/n 0126 also have front idlers and springs, in Wisconsin
1692 total views, 0 today
Voac 4-section hyd. valves
Parts & Heads, Processors
i have 2- of these from Lakewood roller stroke processor, they were mounted on head and came from burnt machine, in lower Michigan, $500 each, […]
1999 total views, 0 today
Timbco 420 angle drive motors
Parts & Heads, Processors
we have both 40 degree angle drive motors that were not damaged in machine fire, type AA2-F part no. Cat 9T0899 51 s/n 1832372 […]
2058 total views, 0 today
Hyundai 130LC-3 w/Lakewood stroke processor
Track Machines
1999 model w/approx.5000 hours, new Cummins engine, new rails, sprockets and front idlers, this may be the fastest stroke head ever made, has Voac valve […]
5386 total views, 0 today
Sub Categories
- Parts & Heads (11)
- Rubber Tired Machines (12)
- Track Machines (13)
Richard’s Machinery & Sales
